加入書籤:
前幾天在爬文章，剛好發現這個，應該有不少人需要的吧，先整理起來：）
Adobe CS3，因使用者將其軟體系列劃分為幾套，
像Indesign在Design Premium中，Fireworks在Web Premium中，
但Web Premium那套，在安裝完並破解後，執行時，會跑出視窗說：序號過期，
反正就是不能用就對了！
但Design那套，破解完畢就沒有此問題！
該怎麼辦哩？
目前往上的方法有２，今天要介紹的就是其中一種，比另外一種真的方便很多！也能解決此問題～
提一下方法一：可以上網搜尋，各系列序號過期的破解，主要是一個主程式檔，例：flash.exe檔，覆蓋近安裝的資料夾，便能破解成功。
但，因要各個程式都要下載一次，比較麻煩，但也是ＯＫ的！
方法二：1. 正常安裝您的 CS3。
2. 用您之前所用的序號啟動 CS3(就讓他出現授權過期的畫面，自動關閉軟體吧！)。
3. 刪除「C:\Program Files\Common Files\Adobe\Adobe PCD\cache\cache.db」。
4. 執行 CS3，這時會要求您再次輸入序號，就請輸入您剛剛所用的那組序號，但先「別」急著按下一步，這個時候您應該也注意到「C:\Program Files\Common Files\Adobe\Adobe PCD\cache\cache.db」再次出現了，請先將「C:\Program Files\Common Files\Adobe\Adobe PCD\cache\cache.db」的屬性設為「唯讀」，然後在按「下一步」。
5. 接著成功進入軟體後，會出現註冊畫面，先按「稍後註冊」。
6. 雖然按了稍後註冊，但軟體載入之後又馬上會跳出註冊畫面，這個時候請先將「C:\Program Files\Common Files\Adobe\Adobe PCD\cache\cache.db」的唯讀屬性取消，然後選擇「永不註冊」，並按下確定。
7. 最後，再次將「C:\Program Files\Common Files\Adobe\Adobe PCD\cache\cache.db」加上「唯讀屬性」。
原文：
QUOTE:
I found a simple, tricky way to make cs3 work with your old trial serial.
I tried that cleanup script and it didnt work for me, but this did.
first off, delete C:\Program Files\Common Files\Adobe\Adobe PCD\cache\cache.db
Then run any of the cs3 programs. Click Accept to continue, then enter your serial that used to work. BEFORE clicking next, you'll notice that you have a NEW cache.db file in C:\Program Files\Common Files\Adobe\Adobe PCD\cache
Right click the file, go to properties and make it READ ONLY, and then click next on CS3 after entering your key.
Next, after you get to the register software screen.
Click "Register Later"
WHOA! Not so fast, it's working but you're not done yet!
The register screen should have popped up again. This time, remove the check for "Read Only" from that new cache.db file and select "Do Not Register" from the the top of the register software menu.
Now, as soon as you click continue, make the cache.db file read only again, and LEAVE IT THAT WAY!
Enjoy CS3!
出處：http://www.commentcamarche.net/forum/affich-3785613-activation-de-adobe-cs3-web-premium
這樣就可以解決嚕，真的很方便！呼～
這些人真厲害！咕狗真是大師ㄚ～
以上資訊來自網路，非本Blog立場，請支持並使用正版軟體！
I tried that cleanup script and it didnt work for me, but this did.
first off, delete C:\Program Files\Common Files\Adobe\Adobe PCD\cache\cache.db
Then run any of the cs3 programs. Click Accept to continue, then enter your serial that used to work. BEFORE clicking next, you'll notice that you have a NEW cache.db file in C:\Program Files\Common Files\Adobe\Adobe PCD\cache
Right click the file, go to properties and make it READ ONLY, and then click next on CS3 after entering your key.
Next, after you get to the register software screen.
Click "Register Later"
WHOA! Not so fast, it's working but you're not done yet!
The register screen should have popped up again. This time, remove the check for "Read Only" from that new cache.db file and select "Do Not Register" from the the top of the register software menu.
Now, as soon as you click continue, make the cache.db file read only again, and LEAVE IT THAT WAY!
Enjoy CS3!
出處：http://www.commentcamarche.net/forum/affich-3785613-activation-de-adobe-cs3-web-premium
這樣就可以解決嚕，真的很方便！呼～
這些人真厲害！咕狗真是大師ㄚ～
以上資訊來自網路，非本Blog立場，請支持並使用正版軟體！
推薦上專欄
^^
本篇迴響權限: 開放所有人迴響